need help?
[email protected]
Continuous Motion Quartz Clock Movement (Silent Sweep) Choice Of Hands And Shaft
$8.41 $14.03
- Product Code: Unbranded
- Availability: 9723
- Price in reward points: 1641
- 1000 Units in Stock
- Item must be returned within:30 Days
- Brand:Unbranded
- Restocking Fee:No
- Condition:New
- Type:Clock Kit
- Return shipping will be paid by:Buyer
- All returns accepted:Returns Accepted
- Refund will be given as:Money Back
THESE ARE CONTINUOUS SECOND HAND MOTION MOTORS - NOT STEPPING TYPE - SUPER QUIET -SILENT
This listing is for one continuous sweeping motion second hand quartz clock movement and your choice of hands. You may select from 4 threaded shaft lengths and one set of hands
These unique movements are simply the finest quartz motors on the market today. Silent, super quiet, no advancing (stepping) of gears, highly accurate, second only to the atomic motors, smooth flowing motion of the second hand. Why not convert all your electric clocks, no power cords or plugs to mess with and still have the gentle flowing motion of the second hand.
4 high torque motors with the extended shaft for extra clearance when running long hands. These motors are also continuous motion and they are SILENT. Available in 1/4", 7/16", 9/16" and 15/16" threaded shafts. If so desired please note on checkout or message me.
*Size: 2-1/8" sq.x 5/8" thick
*5/16" dia. shaft (bushing)
*Choose from 4 threaded shaft lengths:
1/4" (5mm) (5/8" total shaft length including hand stem), extended shaft
7/16" (11mm) (13/16" total shaft length including hand stem), extended shaft
9/16" (14mm) (15/16" total shaft length including hand stem), extended shaft
15/16" (24mm) (1-1/4" total shaft length including hand stem), extended shaft
*3 yr replacement warranty on factory defects
*most quiet motor on the market
*continuous sweep motion of second hand, no ticking
*highly accurate timepiece - 2nd only to the radio controlled motors
*Choice of hands (see below pictures & sizes)
*Requires one "AA" battery, not included
*includes mounting hardware: rubber and brass washers, hex nut and open end kurl nut
PLEASE NOTE: if not using a second hand...please advise and will send a closed nut
You may note your choices on your payment or message me, or I will email you
NOTE ON MEASURING:
Shaft length is threaded portion "B" (in picture), not including hand stem "A".
"B" is the threaded portion that must pass thru your clock face, plus a couple of threads to attach retaining (hex) nut.
HANDS: minute hand measured from end tip to center of mounting hole.
MEASURING DIAL FOR HAND SIZE: measure from top of #12 to bottom of #6, divide in half. This will give your approx. minute hand length. (All hand lengths are for the minute hand).
Please verify your mailing address. Any questions please message me.
Please see all my other listings:
https://www.ebay.com/sch/cp20111/m.html? trksid=p3692
MEASUREMENT FOR MINUTE HAND (measured from center of mounting hole to end tip of hand)
Hour Hand Center Hole .198” diameter
Minute Hand Center Hole .158” x .112”
(oblong shape)
All below hand measurements are for the minute hand
Hands are made of metal, may be painted any color....use primer then color coat
1 - 1-3/8" diamond, black or brass
2 - 1-3/4" spade, black or brass
3 - 2-1/2" spade, black or brass
4 - 2-3/4" diamond, black or brass
5 - 2-1/2" serpentine, black or brass
6 - 3-1/8" serpentine, brass only
7 - 4-1/8" brass only
8 - no longer available
9 - no longer available
10 - 2-5/8" sword, black or brass
11-1-5/8" spade, black only
12-1-7/8" spade, black or brass
13-2-1/16" serpentine, black or brass
14-2-1/4" sword, black or brass
15-3" maltese, black or brass
16 - 6-1/8" reversible (black/white), limited supply of brass, may be clipped to size
17-2-1/2" fancy, brass only
18-3-3/8" banjo, black or brass
19-1-3/4" NO INVENTORY
20-1-5/16" fancy, black (while supply last) or brass
21-2-1/8" spade, black or brass
22-2-3/16" sword, black or brass
23-2-5/8" spade, black or brass
24-3" fancy, black or brass
25-3-1/4" OUT OF INVENTORY
26-4" spade, black or brass
27-4-1/4" straight (may be clipped to size), black or brass
28-4-3/16" sword, black only (WHILE SUPPLY LAST)
29-4-1/2" spade, brass only
30-DISCONTINUED
31-5-1/4" spade, black only
I will match with sweeps (second hands) or you can advise your choice
Lengths: 1-3/8", 1-3/4", 2-3/8", 2-1/2", 2-3/4", 3" & 3-1/2"
I do have a limited supply of red sweeps in lengths: 1-3/4", 2-1/2", 2-3/4", 3" and 3-1/2"
I also list high torque movements w/long balanced hands from 8" to 17.5"
For larger volume and other clock parts, please view my other listings or message me.
https://www.ebay.com/sch/cp20111/m.html?item=263993840997&hash=item3d77425565%3Ag%3A1UAAAO
PLEASE ADVISE CHOICE OF MOTOR'S THREADED SHAFT LENGTH AND HANDS
(YOU MAY NOTE CHOICES ON CHECKOUT (drop down windows) OR MESSAGE ME)
This listing is for one continuous sweeping motion second hand quartz clock movement and your choice of hands. You may select from 4 threaded shaft lengths and one set of hands
These unique movements are simply the finest quartz motors on the market today. Silent, super quiet, no advancing (stepping) of gears, highly accurate, second only to the atomic motors, smooth flowing motion of the second hand. Why not convert all your electric clocks, no power cords or plugs to mess with and still have the gentle flowing motion of the second hand.
4 high torque motors with the extended shaft for extra clearance when running long hands. These motors are also continuous motion and they are SILENT. Available in 1/4", 7/16", 9/16" and 15/16" threaded shafts. If so desired please note on checkout or message me.
*Size: 2-1/8" sq.x 5/8" thick
*5/16" dia. shaft (bushing)
*Choose from 4 threaded shaft lengths:
1/4" (5mm) (5/8" total shaft length including hand stem), extended shaft
7/16" (11mm) (13/16" total shaft length including hand stem), extended shaft
9/16" (14mm) (15/16" total shaft length including hand stem), extended shaft
15/16" (24mm) (1-1/4" total shaft length including hand stem), extended shaft
*3 yr replacement warranty on factory defects
*most quiet motor on the market
*continuous sweep motion of second hand, no ticking
*highly accurate timepiece - 2nd only to the radio controlled motors
*Choice of hands (see below pictures & sizes)
*Requires one "AA" battery, not included
*includes mounting hardware: rubber and brass washers, hex nut and open end kurl nut
PLEASE NOTE: if not using a second hand...please advise and will send a closed nut
You may note your choices on your payment or message me, or I will email you
NOTE ON MEASURING:
Shaft length is threaded portion "B" (in picture), not including hand stem "A".
"B" is the threaded portion that must pass thru your clock face, plus a couple of threads to attach retaining (hex) nut.
HANDS: minute hand measured from end tip to center of mounting hole.
MEASURING DIAL FOR HAND SIZE: measure from top of #12 to bottom of #6, divide in half. This will give your approx. minute hand length. (All hand lengths are for the minute hand).
Please verify your mailing address. Any questions please message me.
Please see all my other listings:
https://www.ebay.com/sch/cp20111/m.html? trksid=p3692
MEASUREMENT FOR MINUTE HAND (measured from center of mounting hole to end tip of hand)
Hour Hand Center Hole .198” diameter
Minute Hand Center Hole .158” x .112”
(oblong shape)
All below hand measurements are for the minute hand
Hands are made of metal, may be painted any color....use primer then color coat
1 - 1-3/8" diamond, black or brass
2 - 1-3/4" spade, black or brass
3 - 2-1/2" spade, black or brass
4 - 2-3/4" diamond, black or brass
5 - 2-1/2" serpentine, black or brass
6 - 3-1/8" serpentine, brass only
7 - 4-1/8" brass only
8 - no longer available
9 - no longer available
10 - 2-5/8" sword, black or brass
11-1-5/8" spade, black only
12-1-7/8" spade, black or brass
13-2-1/16" serpentine, black or brass
14-2-1/4" sword, black or brass
15-3" maltese, black or brass
16 - 6-1/8" reversible (black/white), limited supply of brass, may be clipped to size
17-2-1/2" fancy, brass only
18-3-3/8" banjo, black or brass
19-1-3/4" NO INVENTORY
20-1-5/16" fancy, black (while supply last) or brass
21-2-1/8" spade, black or brass
22-2-3/16" sword, black or brass
23-2-5/8" spade, black or brass
24-3" fancy, black or brass
25-3-1/4" OUT OF INVENTORY
26-4" spade, black or brass
27-4-1/4" straight (may be clipped to size), black or brass
28-4-3/16" sword, black only (WHILE SUPPLY LAST)
29-4-1/2" spade, brass only
30-DISCONTINUED
31-5-1/4" spade, black only
I will match with sweeps (second hands) or you can advise your choice
Lengths: 1-3/8", 1-3/4", 2-3/8", 2-1/2", 2-3/4", 3" & 3-1/2"
I do have a limited supply of red sweeps in lengths: 1-3/4", 2-1/2", 2-3/4", 3" and 3-1/2"
I also list high torque movements w/long balanced hands from 8" to 17.5"
For larger volume and other clock parts, please view my other listings or message me.
https://www.ebay.com/sch/cp20111/m.html?item=263993840997&hash=item3d77425565%3Ag%3A1UAAAO
PLEASE ADVISE CHOICE OF MOTOR'S THREADED SHAFT LENGTH AND HANDS
(YOU MAY NOTE CHOICES ON CHECKOUT (drop down windows) OR MESSAGE ME)
